Posts for: December, 2020
If you're into social media, you might have run across the idea that there's nothing to straightening your teeth. According to some SM influencers, you can even do it yourself with a few rubber bands. But the truth is, the mechanics of moving teeth are much more complex—and taking orthodontics into your own hands can cause extensive dental damage.
In reality, all bite problems (malocclusions) require the advanced knowledge and expertise of an orthodontist to correct them safely and effectively. Some, in fact, may require other devices along with braces or clear aligners to achieve the desired outcome for a particular malocclusion.
Here are a few of those additional tools an orthodontist may use and why they may be needed.
Headgear. Some malocclusions result not just from misaligned teeth, but problems with jaw or facial structure development. To accommodate additional factors like this, an orthodontist may include headgear during treatment, usually a strap running around the back of a patient's head or neck and attached in the front to brackets bonded to the teeth (usually the molars). Wearing this headgear for several hours a day can improve jaw and facial development.
Elastics. Unlike basic rubber bands DIYers might use to move their teeth (often with damaging results), elastics are specialized bands designed for targeted tooth movement. They're needed for bite problems that require moving some teeth and not moving others. As such, elastics can be applied in conjunction with braces to perform either intended task—move or prevent movement for specific teeth.
Anchorage. One of the tools often used with elastics for targeted tooth movement are temporary anchorage devices (TADs). These are typically tiny screws imbedded into the jawbone a short distance from fixed braces. An elastic band connected to the braces at a specific point is then attached to the TAD, which serves as an anchor point for the elastic.
These and other devices can help orthodontists achieve a successful correction for certain individual bite problems. And unlike the DIY methods touted on the Internet, these additional tools help them do it safely.
If you would like more information on straightening teeth through orthodontics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”
Fluoride is an important part of your child's dental development. But if children take in too much of this important mineral, they could experience enamel fluorosis, a condition in which teeth become discolored with dark streaking or mottling.
That's why it's important to keep fluoride levels within safe bounds, especially for children under the age of 9. To do that, here's a look at the most common sources for fluoride your child may take in and how you can moderate them.
Toothpaste. Fluoridated toothpaste is an effective way for your child to receive the benefits of fluoride. But to make sure they're not getting too much, apply only a smear of toothpaste to the brush for infants. When they get a little older you can increase that to a pea-sized amount on the end of the brush. You should also train your child not to swallow toothpaste.
Drinking water. Most water systems add tiny amounts of fluoride to drinking water. To find out how much your water provider adds visit “My Water's Fluoride” (//nccd.cdc.gov/doh_mwf/Default/Default.aspx) online. If it's more than the government's recommendation of 0.70 parts of fluoride per million parts of water, you may want ask your dentist if you should limit your child's consumption of fluoridated drinking water.
Infant formula. Many parents choose bottle-feeding their baby with infant formula rather than breastfeed. If you use the powdered form and mix it with tap water that's fluoridated, your baby could be ingesting more of the mineral. If breastfeeding isn't an option, try using the premixed formula, which normally contains lower levels of fluoride. If you use powdered formula, mix it with bottled water labeled “de-ionized,” “purified,” “demineralized” or “distilled.”
It might seem like the better strategy for preventing fluorosis is to avoid fluoride altogether. But that can increase the risk of tooth decay, a far more destructive outcome for your child's teeth than the appearance problems caused by fluorosis. The better way is to consult with your dentist on keeping your child's intake within recognized limits to safely receive fluoride's benefits of stronger, healthier teeth.
If you would like more information on fluoride and your baby's dental health, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Tooth Development and Infant Formula.”
Chipped a tooth? Don't beat yourself up—this type of dental injury is quite common. In fact, you probably have a favorite celebrity who has chipped one or more of their teeth. The list is fairly long.
Some chipped a tooth away from the limelight, such as Tom Cruise (a hockey puck to the face as a teen), Jim Carrey (roughhousing on the playground) and Paul McCartney (a sudden stop with a moped). Others, though, chipped a tooth while “on the job.” Taylor Swift, Hillary Duff and Jennifer Lopez have all chipped a tooth on stage with a microphone. And chipped teeth seem to be an occupational hazard among professional athletes like former NFL star, Jerry Rice.
Since smiles are an indispensable asset to high-profile celebrities, you can be sure these stars have had those chipped teeth restored. The good news is the same procedures they've undergone are readily available for anyone. The two most common restorations for chipped teeth are dental bonding and veneers.
The least invasive way to fix a chipped tooth is bonding with a material known as composite resin. With this technique, resin is first mixed to match the tooth color and then applied to the chipped area or applied in layers of color to get just the right look. After a bit of shaping, curing and adjustment, we're done—you can walk out with a restored tooth in one visit.
Bonding works well with slight to moderate chips, but it could be less durable when there is more extensive damage. For that, you may want to consider porcelain veneers. Veneers are thin wafers of dental porcelain that are bonded to the front of teeth to mask blemishes like stains, slight gaps or, yes, chips. Veneers can be so lifelike that you won't be able to tell the veneered tooth from your other teeth. They are fashioned to match the color and shape of an individual's teeth. Because of the time and design detail involved, veneers are more expensive than bonding, yet still within an affordable range for many.
Teeth require some alteration before applying traditional veneers because otherwise the teeth can appear bulky when the veneer is bonded to the existing tooth. To compensate, we remove a little of the tooth enamel. Because this loss is permanent, you'll need to wear veneers or have some other form of restoration for the tooth from then on. For many people, though, that's a small price to pay for a smile without chips.
Your first step to repairing a chipped tooth is to come in for an examination. From there, we'll recommend the best option for your situation. And regardless of which, bonding or veneers, we can change your smile for the better.
If you would like more information about restoring injured teeth, please contact us or schedule a consultation. To learn more, read the Dear Doctor magazine articles “Teeth Whitening” and “Porcelain Veneers: Strength and Beauty as Never Before.”